FencingFeatured~10 min setup3D Preview
Swing gate
Single or double-leaf swing gate with frost-aware post embedment, EN 1935-graded hinges by leaf weight, child-safety ≤120 mm infill spacing, EN 12453 motorisation option and EN 12209 lockset.
12 parameters24 spec items
Each template imports as a regular configuration in your workspace. You can edit or delete it later.
12 parameters
Display units
Calculations
Leaf width, mm1390
Leaf width within material limit1
Leaf area, m²2.5
Leaf weight, kg121.06
Bar spacing c/c, mm107
Bar spacing ≤120 mm (child safety)1
Total hinge count6
Load per hinge × 1.5 safety, kg60.53
Hinge spindle ØM20
Wind force per leaf, kN1.25
Post embedment, mm1400
Post total height, mm3300
Footing Ø, mm400
Footing concrete C25/30, m³0.35
Paint area total, m²13.65
24 spec items
This preview uses sample material prices so you can test the calculation. Edit unit prices below or replace them with your own catalog after import.
Materials list
Click any unit price to edit the estimate
| Material | Qty | Size | Unit | Price | Total |
|---|---|---|---|---|---|
| Gate post RHS (S235JR per EN 10025) | 2 | 0 m² | m2 | €36.00 | |
| Post cap (welded plate) | 2 | — | m | €24.00 | |
| Concrete footing C25/30 | 0.35 | — | m3 | €42.24 | |
| Footing rebar cage Ø12 | 2 | 1300 mm | m3 | €190.00 | |
| Top rail RHS 60×40×3 | 2 | 1390 mm | pcs | €56.00 | |
| Bottom rail RHS 60×40×3 | 2 | 1390 mm | pcs | €56.00 | |
| Vertical stile RHS 60×40×3 | 4 | 1720 mm | pcs | €112.00 | |
| Vertical bar SHS 20×20×2 | 24 | 1700 mm | pcs | €672.00 | |
| Hinge (M20 spindle, ball-bearing, adj.) | 6 | — | pcs | €51.00 | |
| Hinge weld plate 100×80×8 | 12 | — | pcs | €102.00 | |
| Drop bolt Ø20 stainless, 600 mm | 1 | — | pcs | €0.18 | |
| Drop bolt ground receiver sleeve | 2 | — | pcs | €0.36 | |
| Gate lock case + handle (EN 12209 G6) | 1 | — | pcs | €8.50 | |
| Euro profile cylinder 35/35 (EN 1303 G6) | 1 | — | m | €12.00 | |
| Floor gate stop (rubber + SS) | 2 | — | pcs | €7.00 | |
| Hot-dip galvanising (EN ISO 1461) | 13.65 | — | pcs | €382.20 | |
| Powder coat (EN 12206-1) | 13.65 | — | m2 | €245.70 | |
| Bolt M10×30 A2 DIN 933 | 40 | — | pcs | €7.20 | |
| MIG wire ER70S-6 | 3.52 | — | pcs | €12.32 | |
| Total | €2,016.70 | ||||